Specifications; Operation; Charging The Battery; Delivery Scope - MSA EVOLUTION 5000 Manuel D'utilisation

GB

Specifications

Charger Width
Height
Depth
Power adapter Width
Height
Depth
Weight, complete
Voltage range

Operation

For standard 220/230V, AC 50 Hz use:
Plug the DC plug of the AC/DC Adapter into the charger and
plug the AC Adapter into any standard 220/230-VAC outlet.

Charging the Battery

1. Once the charger is power applied:
The red "Status" light turns ON, the "Charge" LED
flashes green for readiness .
2. Place the battery into the charger until contacts are
engaged.
Once the battery is properly fitted, the "Charge" LED
turns to continuous red light, the charging cycle starts.
At approx. 90% battery charge the "Charge" LED flashes
alternately red/green.
At termination of the charging cycle, the "Charge" LED
turns to continuous green.
Remove battery from charger.
Note: It is normal for the charger, AC Adapter, or the battery
to become warm during charging.

5. Delivery Scope

Configurations

The EVOLUTION 5000 TIC is available as kit with various
options and accessories. There are several part-numbered
kits to choose from. Please see the EVOLUTION 5000
Catalogue for complete ordering information.
GB
67 mm
38 mm
135 mm
58 mm
90 mm
95 mm
58 gr.
220 V/230 V, 50 Hz
EVOLUTION 5000 Standard-Kits
The EVOLUTION 5000 as a complete kit comes with the
following items:
Thermal Imaging Camera
Two Rechargeable Lithium Ion Batteries
Standard Universal Charger Kit or or or or or
Truck-Mounted Charging System
SMA Video Out Connector
Instruction Manual
The EVOLUTION 5000 TIC can be ordered as standard kit.
See ordering information in catalogue.

6. Options

The user can choose to purchase the following attachments:
Wrist Strap/Harness Clip – Attaches to the TIC and
includes a clip for securing the TIC to a personal harness
while not in use.
Fig. 11: Wrist Strap/Harness Clip
Shoulder Strap – Attaches to the TIC to allow for easy
carriage of the camera while not in use.
Fig. 12: Shoulder Strap
Retractable Lanyard - Attaches to the TIC to allow for
easy carriage and quick use of the camera while attached
to the user's belt or harness. The lanyard easily retracts
the camera back into place when not in use (see Fig. 2).
Thermal Imaging Camera
11