HBM PMX Guide Rapide page 24

Quick start
22
S The PMX amplifier channel is set to the full bridge
sensor type, with the measuring range of 4 mV/V.
S Amplification is set to 500 μm/m , with a sensor sensit­
ivity of 1.5 mV/V.
S The filter type is Bessel, the filter frequency is set to 5
Hz (average to high attenuation).
Example: Configuring the PMX with displacement
transducer
Example: WI/10mm
Slot 2 is fitted with a PX455, its third channel is assigned
to the displacement transducer.
A3259-4.0 HBM: public
PMX