Télécharger Imprimer la page

Thomashilfen 820 Notice De Montage page 6

Accessoires

Publicité

Les langues disponibles

Les langues disponibles

Seatfix connector (LATCH / UAS) (for turning plate)
(accessory)
NOTE: The Seatfix connector (LATCH / UAS) cannot be used if the vehicle
does not have an seatfix (LATCH/ UAS) fixture (at least on the rear passenger
side). Check before buying!
If UAS is not available in your car choose item 819 Stabilising bow to install
footrest adapter.
First release the rear locking screw on the tube support beneath the turning
plate (the plate is rounded at this point). (Fig. 3a)
Then lay the Seatfix connector (LATCH / UAS) onto the vehicle's seat. The bore
holes at the ends of the guide tubes must point downwards to the vehicle's seat.
Guide the Seatfix connectors (with yellow release buttons) LATCH / UAS into
the vehicle's seatfix anchors (LATCH / UAS). Check that the connectors have
locked into place safely by pulling. Now fit the Seatfix connection / LATCH /
UAS into the turning plate's rear support (the plate is rounded at this point) with
the released locking screw. (Fig. 3b)
Adjust the extension length of the Seatfix connector (LATCH / UAS) to your ve-
hicle. The child's car seat has to have contact with the backrest of the vehicle's
seat when mounted on the turning plate.
Once the requested position is adjusted, carefully raise the front of the turning
plate until you can reach the rear locking screw and tighten this correctly. (Fig.
3c)
NOTE: If using the Seatfix connector (LATCH / UAS) the turning plate / seat
could be supported on the floor of the vehicle at the front for extended stability.
Use the footrest (item code 805 and 806) or the stand (item code 817).
CAUTION: The Seatfix connector (LATCH / UAS) for the turning plate serves
to position the car seat and does not replace the safety belt. The child / the seat
ALWAYS has to be secured with the 3-point belt of the vehicle according to the
user manual. Even when seat is not occupied.
6
Item code: 818

Publicité

loading