Battery Replacement - Alpine TUE-T012 Mode D'emploi

1
34
Remote Control

Battery Replacement

Applicable battery: Use one CR2025 or
equivalent.
Opening the battery case
1 Place the remote upside down on a flat,
level surface.
Looking at the back of the remote, grasp the
battery holder at the bottom of the unit
between your forefinger and thumb. Insert a
pointed object into the left side of the
elongated hole.
Slide the pointed object to the right (as
2
indicated by the arrow) while at the same
time pulling on the battery holder.
2 Pull the battery holder gently out with your
thumb and forefinger.
Replacing the battery
Put the battery in the case with the (+) indica-
tion upward as shown in the illustration.
Closing the case
Push the battery holder back into the remote
until a click is heard.
English