Maxspect JUMP Série Mode D'emploi page 5

Masquer les pouces Voir aussi pour JUMP Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Pulsing Mode Two
1. Set a speed in Mode "1"(range 01-15);
2. Set a duration in Mode "3"(range 01-20);
3. For example, Mode "1"=05, Mode "3"=10(12s), the
speed of pump will change smoothly from 05 to 20 and
back to 05 in 12s and repeat.
Speed
20
Set Speed
Duration Min:01=3s, Max:20=22s
Maintenance
Your Maxspect Jump Series DC Centrifugal Pump is
designed to operate optimally with little attention after
initial setup. However, due to the harsh conditions of a
saltwater aquarium and resulting buildup of algae and
other organic matter, it is advisable to clean the pump to
ensure
the
longevity
recommends doing a cleaning every 6 months or as
necessary. This can be accomplished by opening the
impeller housing and gently brushing the impeller and
inside of impeller housing with a soft brush under
running water. If there is calcium buildup, it may be
necessary to soak these parts in a mild acid solution such
as vinegar. Do not use strong acids, because these may
damage the components. After cleaning, reassemble the
appliance.
Time
of
appliance.
Maxspect
Limited Warranty
Maxspect (HongKong) Limited warrants all Maxspect™
Turbine Duo DC pump products against defects in
workmanship for a period of 12-months from the date of
purchase. If a defect exists during the warranty period,
Maxspect (HongKong) Limited at its option will either
repair (using new or remanufactured parts) or replace
(with a new or remanufactured unit) the product at no
charge.
THE WARRANTY WILL NOT APPLY TO THE PRODUCT IF IT
HAS BEEN DAMAGED BY MISUSE, ALTERATION,
ACCIDENT, IMPROPER HANDLING OR OPERATION, OR IF
UNAUTHORIZED REPAIRS ARE ATTEMPTED OR MADE.
SOME EXAMPLES OF DAMAGES NOT COVERED BY
WARRANTY INCLUDE, BUT ARE NOT LIMITED TO, USING
AFTER-MARKET LED BULBS AND MODIFICATION OF THE
CIRCUITRY, WHICH ARE PRESUMED TO BE DAMAGES
RESULTING FROM MISUSE OR ABUSE.
DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL
DAMAGES:
You and any other user of
products shall not be entitled to any consequential or
incidental damages, including without limitation, loss of
use of the unit, inconvenience, damage to personal
property, phone calls, lost income or earnings. This
warranty gives you specific legal rights and you may also
have other rights, which vary from state to state.
MAXSPECT
LTD.
MAKES
REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH
RESPECT TO THE PRODUCT'S QUALITY, PERFORMANCE,
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE. AS A RESULT, THIS PRODUCT, IS SOLD "AS IS,"
AND YOU THE PURCHASER ASSUME THE ENTIRE RISK AS
TO ITS QUALITY AND PERFORMANCE.
IN NO EVENT WILL
MAXSPECT LTD
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY DEFECT IN THE
PRODUCT OR ITS DOCUMENTATION.
The warranty, disclaimer, and remedies set forth above
are exclusive and replace all others, oral or written,
expressed or implied. At no time will any Maxspect
(HongKong) Limited dealers, agents, or employees be
authorized to make any modifications, extension, or
addition to this warranty.
Some states do not allow the exclusion or limitation of
implied warranties or liability for incidental or
consequential damages, so the above limitation or
exclusion may not apply to you.
Maxspect (HongKong) Limited
NO
WARRANTY
BE LIABLE FOR DIRECT,
EN
OR
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mj-dc8k

Table des Matières