Product Content; Precautions - Maxspect JUMP Série Mode D'emploi

Dear Customer,
Thank you for purchasing this product.
For optimum performance and safety, please read
these instructions carefully.
User Memo:
Date of purchase:
Dealer name:
Dealer address:
Dealer website:
Dealer email:
Dealer phone no.:
Please visit us on Facebook or Twitter!
https://www.facebook.com/Maxspect
http://twitter.com/maxspectled

Product Content

x1
x1
x1
x4
x1 x1
x1 x1
x1 x4
x3

Precautions

Before using this Maxspect™ Jump Series DC
Centrifugal Pump please read these operating
instructions carefully. Take special care to
follow the safety suggestions listed below.
Afterwards keep this manual handy for future
reference.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. DANGER – To avoid possible electric shock, special
care should be taken since water is employed in the
use of aquarium equipment. For each of the following
situations, do not attempt to repair by yourself; return
the appliance to an authorized service facility for
service or discard the appliance.
a) If the appliance shows any sign of abnormal water
leakage, immediately unplug it from the power
source.
b) Carefully examine the appliance after installation. It
should not be plugged in if there is water on parts
not intended to be wet.
c) Do not operate any appliance if it has a damaged
cord or plug, or if it is malfunctioning or has been
dropped or damaged in any manner.
d) To avoid the possibility of the appliance plug or
receptacle getting wet, position aquarium stand and
tank to one side of a wall-mounted receptacle to
prevent water from dripping onto the receptacle or
plug. A "drip-loop" shown in the figure, should be
arranged by the user for each cord connecting an
aquarium appliance to a receptacle. The "drip-loop"
is that part of the cord below the level of the
receptacle, or the connector if an extension cord is
used, to prevent water traveling along the cord and
coming in contact with the receptacle. If the plug or
socket does get wet, DON'T unplug the cord.
Disconnect the fuse or circuit breaker that supplies
power to the appliance. Then unplug and examine
for presence of water in the receptacle.
2. Close supervision is necessary when any appliance is
used by or near children.
3. To avoid injury, do not contact moving parts or hot
parts such as heaters, reflectors, lamp bulbs, and the
like.
EN
Drip Loop
1