Cleaning; Troubleshooting - Medion LIFE P66970 Notice D'utilisation

10. Cleaning

• Before cleaning, pull the plug out of the mains socket. Clean the external surfac-
es of the device with a soft, dry cloth. Do not use chemical solutions or cleaning
agents because these may damage the device's surface or the labels on it.
• Never allow liquids to get inside the device.

11. Troubleshooting

If a fault occurs, first see whether you can resolve the problem yourself. You might
find this overview useful.
Fault
No function
No sound
Audio distor-
tion
Alarm does
not sound
Possible cause
The device is disrupted by a
thunderstorm, static charge
or another external factor.
The mains adapter is not in-
serted correctly.
The current volume is set too
low.
Mute setting is activated.
When the device is connected
via AUX IN or Bluetooth: The
volume of the external device
is too low.
The volume (on the external
device) is too high.
The alarm is not set correctly.
Corrective action
Pull the mains adapter out of
the socket and then plug it in
again.
Check the power connection
at the network adapter con-
nection and the socket.
Increase the volume.
Switch off the mute setting.
Increase the volume on the
external device.
Decrease the volume, both on
the alarm clock and on the ex-
ternal device (if connected)
Check whether the correct
alarm time has been set.
Check whether the alarm has
been activated.
DE
EN
FR
ES
IT
NL
61