Skil RW5763A-00 Guide D'utilisation page 14

Loosening Fasteners
The torque that is required to loosen a fastener averages 75% to 80% of the tightening torque,
depending on the condition of the contacting surfaces. However, if rust or corrosion causes
seizing, more torque may be required.
Using as hand tool (Fig .8)
Fig. 8
You can use the tool as a hand ratchet wrench
by turning the tool in the direction arrows as
illustrated. In particular when loosening a stiff
bolt/nut, loosen it by hand first then turn the
tool on.
NOTICE: Excessive fastening torque may
damage the bolt/nut, the socket or the tool.
14