LENCO PDR-031 Mode D'emploi page 12

Software update: Press Select and choose "yes" to update the software if needed. Updating can
only be done with a micro usb cable.
Remark: only select the software update option if you have an update for this unit. (if you accidently
selected this option, use the power off/on the restart the radio)
SW version: Press Select to view system version.
Using the radio- FM MODE
Turn the radio on, press Mode button repeatedly and select the FM mode. The display will show
'FM' and the current station name or frequency if RDS is not available.
Manual search
To search manually, first short press the stations button and the turn the select knob up to scan
upwards or turn the select knob down to scan downwards.
Auto search
To initiate auto search, press and hold the select knob button. The radio starts to scan the frequency
band. It will stop automatically when a station has been found.
If you want the radio to auto search downwards or upwards then you have to do a manual search
downwards or upwards prior to long pressing the select button.
FM mode- Scan settings
Press the menu button and rotate the select knob to select 'Scan setting'. Short press the Select
knob and choose between 'Strong stations only' or 'All stations' by turning the select knob. Press the
Select knob to confirm your choice. If choose 'Strong station only', the radio will only scan and play
stations with a strong signal. If selecting 'All stations', the radio will also scan and play stations with a
weak signal.
FM mode- Audio setting
Press the menu button and rotate the Select knob. Choose 'Forced mono' 'Yes' or 'No' and short
press the Select knob. If your favorite radio stations signal is weak, then choose 'Forced mono 'Yes''
to get better sound quality.
FM mode-System settings (see DAB mode 'system settings)
FM Display Modes
This function allows information relating to the current station to be shown in the display, short
press the Select knob repeatedly to scroll through the following information screens
12