LENCO PDR-031 Mode D'emploi page 9

Basic operation-getting started
1. Connect the mains adaptor to the micro USB jack, fully extend the telescopic antenna, plug in
and switch on at the mains.
2. The display backlight will illuminate, and the clock (00:00:00) (Time is not set) will flash.
3. On the very first use The DAB mode will automatically be selected and the radio will perform a
full scan. The display will show 'Scanning' with a bar indicator showing the scan progress and
the total number of stations found.
4. When the scan is finished the radio will play the first alphanumerically found station. If the
radio does not find any stations, 'No DAB Station' will be displayed.
5. Adjust the volume to the desired level using the VOL (+/-) knob.
6. Press the stations button and use knob to scroll through the stations list. Press the 'select' knob
on your favorite station.
7. Press the Mode button to switch between DAB, FM, Bluetooth and Aux input mode,
8. Short press the Standby button to go into 'Standby' mode.
Using the radio- DAB mode
DAB Mode- Full scan
This function will scan for all available DAB stations, Band III channels.
In DAB mode, press Menu button and rotate the select knob to select 'Full Scan' then short press the
Select knob to start the DAB full scan. When the scan is finished, the radio will return to the last
played DAB radio station. All stations found will be listed in the station list, which is show when
pressing the 'stations' button.
Please note that the available DAB+ radio stations differ per region/city.
DAB Mode- Manual tune
This function allows a specific or new ensemble to be manually added to the stations already
available on the radio.
In DAB mode, press the Menu button and use the Select knob to navigate until "Manual tune" is
highlighted, press the Select knob to confirm.
Use the Select knob to navigate until the desired frequency is selected and then press the Select
knob, the frequency and name of the ensemble and the signal strength will be displayed.
Press the Select knob again to add the ensemble and automatically tune to that station.
9