Description Of The Symbols - Ayce MJ10250VIIIC Traduction De La Notice Originale

GUIDELINES FOR USING EXTENSION CORDS
• Make sure the extension cord is in good condition. When using an extension cord,
be sure to use one that is heavy enough to carry the current that your product
will draw. An undersized cord will cause a drop in line voltage, which will result
in loss of power and overheating.
• Make sure your extension cord is properly wired and in good condition. Always
replace a damaged extension cord, or have it repaired by a qualified person
before using it. Protect your extension cords from sharp objects, excessive heat,
and damp or wet areas.
• Before connecting the motor to the power line, make sure the switch is in the
OFF position and the electric current is rated the same as the current stamped
on the motor nameplate. Running at a lower voltage will damage the motor.
!
This tool must be grounded while in use in order to protect the
operator from electric shock.
WARNING

DESCRIPTION OF THE SYMBOLS

1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible risks.
The safety symbols and the explanations that accompany them must be perfectly
understood. The warnings in themselves do not remove the risks and cannot replace
correct actions for preventing accidents.
This symbol, marking a point of safety, indicates
!
a caution, warning or danger. Ignoring this warning
can result in an accident to yourself or others. To
limit the risks of injury, fire or electrocution,
always follow the recommendations indicated.
WARNING
Before any use, refer to the corresponding section
in this user manual.
These symbols indicates the requirement of
wearing ear protection, eye protection.
Caution, risk of injury.
Danger, keep hands away from blade.
180 | 181
GB