Etherma One Série Mode D'emploi page 27

Maintenance
• Always disconnect the device from elec-
tricity before you start cleaning the
radiator.
• Recurrently check level of the heating
medium inside the radiator.
Before disassembly
1. Disconnect the device from electric cir-
cuit and ensure that the radiator has
cooled down before you start disassem-
bling the radiator.
2. Be careful — electric radiator filled with
heating liquid may be very heavy. Ensure
all necessary safety measures.
Utilization
This product should not be disposed of as
general waste but should be brought to the
appropriate collection point for recycling
of electric and electronic devices. This in-
formation is present on the product, user
manual and on packaging. Information on
• Clean the item with a dry or damp cloth
with a small amount of detergent with-
out any solvents or abrasive agents.
3. Prior to disassembly make sure that wa-
ter inside both the radiator and installa-
tion does not cause any damage (close
the valves, empty the radiator, etc. if
required).
the appropriate point for used devices can
be provided by your local authority or ven-
dor of the product.
Thank You for your effort towards environ-
ment protection.
27