Publicité
Les langues disponibles
Les langues disponibles
High Performance Air Purifi er
If the device does not work properly,
check whether you are able to rectify the
problem yourself. If the problem cannot
be solved with the steps below, contact
the customer service department.
Do not attempt to repair an elec-
trical device yourself!
The mains plug is not inserted in the plug
socket correctly.
Correct the fit of the mains plug.
The plug socket is defective.
Try another plug socket.
There is no mains voltage.
Check the fuse of the mains
connection.
The front cover ( ) is not fi tted correctly in
the main unit ( ). / The safety switch (
is not depressed.
Correct the fit of the front cover.
The device has not been switched on via
the
fi eld (
).
Press the
field.
Too many devices connected to the same
circuit.
Reduce the number of devices in the
circuit.
The batteries are empty.
Replace the batteries.
There are obstacles between the remote
control and the infrared sensor in the
device.
Remove possible obstacles or aim the
remote control at the sensor in the
device from a different position.
The distance between the remote control
and the device is too great.
Reduce the distance.
Dispose of the packaging material
in an environmentally friendly man-
ner so that it can be recycled.
The batteries should be removed
before disposing of the remote
control and disposed of separate-
ly from it at suitable collection
points.
This device is governed by the
European Directive 2012/19/EU
on waste electrical and electron-
ic equipment (WEEE). Do not
dispose of this device as normal
domestic waste, but rather in an
environmentally friendly manner
via an offi cially approved waste
)
disposal company.
EN
Publicité
