High Performance Air Purifi er
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
Use only the battery type specifi ed in
the technical data.
Take batteries out of the remote con-
trol when they are dead or if you will
not be using the remote control for
a prolonged period. This will prevent
any damage caused by leaks.
Do not use the remote control if a
battery has leaked. Remove dead bat-
teries from the battery compartment
immediately.
The device has a safety switch (
main unit ( ) (
). The device can
only be switched on if the front cover ( )
is fi tted correctly and the safety switch is
depressed as a result (automatic switch-off
function deactivated). If the front cover is
removed during operation, the automatic
switch-off function is activated and the
device switches off.
The device can be controlled both via
the control panel (
) and via the remote
control (
):
Timer = Timer (
)
On / Off = On / Off (
I / II / III = Speed level I / II /III
Child Lock = Child Lock (
Circulate = Fan Speed (
Sterilize = UV lamp (
Auto = Auto mode (
Ionizer = Anion (
Sleep = Sleep mode (
The replace reminder cannot be reset via
the remote control.
Touch the relevant fi eld to activate or
deactivate the individual function.
When the operating fi elds fl ash, this indi-
cates which functions are activated.
Switch the device on / off
Set the speed level
The fan of the device has three speed
levels. They can be set by touching the
is indicated by the various fan symbols
on the fan speed display (
Activate / set / deactivate timer
The device has an 8-hour timer. You can
) in the
set it by touching the
times (01H to 08H – Off). While setting,
the possible options are shown on the
μg / m³ display (
value.
Activate / deactivate AUTO mode
When this function is active, the device
measures the particulate concentration
via the sensor (
selects a suitable speed. In AUTO mode,
the speed level accordingly cannot be
adjusted manually.
)
)
)
)
)
)
)
fi eld several times. The level
).
fi eld several
) of the particulate
) and automatically
EN