cecotec CONGA TURBOCICLONIC Guide D'utilisation page 19

• Disconnect the dust box from the appliance. (Fig. 4)
• Open the lid of the dust box and empty the contents into the appropriate waste
disposal receptacle.
• Close the lid of the dust box.
• Attach the dust box to the appliance.
• Connect the hose to the vacuum cleaner's air intake.
Changing the filters:
• Motor filter, it is advisable to be changed at least once a year or every 100 hours of the
appliance's use.
• HEPA air vent filter (High efficiency air filter that efficiently retains spores, ash, sawdust,
pollen...), it is advisable to change it a least once a year or after every 100 hours of use.
• To remove filters:
Motor filter:
• Disconnect the dust box from the appliance. (Fig. 4)
• The filter motor can be found in the motor's turbine air entrance. (Fig 5).
Outlet filter:
• Remove the filter from its housing.
• To reassemble the filter, proceed with the above ins- tructions, in reverse order.
Supplies
• Supplies can be acquired from distributors and authorised establishments (such as
filters, etc. ) for your appliance model.
• Always use original supplies, designed specifically for your appliance model.
Anomalies and repair
• Take the appliance to an authorised technical support service if problems arise. Do not
try to dismantle or repair without assistance, as this may be dangerous.
• If the connection to the mains has been damaged, it must be replaced and you should
proceed as you would in the case of damage.
• For EU product versions and/or in case that it is requested in your country:
ENGLISH
19