Assembly Instructions - Antares ANTARION G6+ CONNECT Manuel D'installation

ASSEMBLY INSTRUCTIONS

MAKE SURE TO BE CAREFUL
When selecting the antenna mounting location, be sure that the environment is free of
obstacles that could interfere with the antenna's connection to the satellite.
It is appropriate that the mounting location should be as flat as possible and in the middle
of the transverse plane of the vehicle.
Make sure that the antenna location is on a solid and inflexible material.
It is important that the closing direction of the antenna is towards the rear of the vehicle.
Thus, when the antenna is closed during driving, the effect of wind will be minimized.
Before proceeding with the mounting operation, make sure that the surface receiving the
antenna is clean and dry. There are 2 steps to fixing the antenna on the vehicle roof: Use
the aluminum plate by fixing it with glue (Sika for example), then bolt the antenna on the
threaded rods of this plate AND follow the following instructions:
5
English