Attaching Laser Units; Power On - SKF TMEB 2 Mode D'emploi

3.2

Attaching laser units

The units are provided with strong
magnets and V-guides. Place the
V-guides of the first unit in the
groove of the first pulley and
press the unit firmly until the
magnet secures it to the pulley.
Place the second unit in the
opposite groove of the second
pulley. Position both units facing
each other as shown in figure 4.
3.3

Power on

Switch on the laser unit by pressing the ON/OFF button.
10
Fig. 3. Mounting the unit
Fig. 4. Units on pulleys
Belt alignment tool
21
2))
%HOW $OLJQPHQW 7RRO
70(%  /DVHU 8QLW
SKF TMEB 2