Clock Setting; Microwave Cooking - HAEGER Magic Micro 26 Mode D'emploi

2. CLOCK SETTING

When the microwave oven is electrified, the LED flashes 3 times and then display
flashing colon ":", prompting you to input the time. Follow the below steps to set the
current time.
Example: to set 12:30
Steps
1 After power-up, the colon flashes.
2 Press Preset.Clock button once
3 Turn Auto Cooking/Time.Weight knob to set the hours.
4 Press Preset. Clock button once again.
Turn Auto Cooking/Time.Weight knob to set the
5
minutes.
Press Preset. Clock button once again or wait for 5
6
seconds, and the numbers will go steadily.
Note: If you press the "Stop/Clear" button while setting the time, cancel the
program/setting.
Note: Always set the time when you plug in the power cord or after power
interruption.

3. MICROWAVE COOKING

This function is used for cooking and heating food.
1) Place the food to be heated up into suitable tableware.
2) Open the door and place the vessel in the middle of the glass plate. Then close
the door. (For safety reasons the device only works when the door is firmly
closed.
3) Press the "Micro Power" control button until the desired function is been
displayed on the screen. The table below indicates 5 microwave power options
with corresponding signs and functions:
4) Turn the "Time.Weight" button to set the cooking/warming time. The LCD screen
will display the time you have chosen.
5) Press the "Instant/Start" button to start the cooking/warming process. The LCD
screen displays the countdown of the selected cooking time.
7
English
Display
：
00:00
12:00
12:00
12:30