Overview Of The Components; Installation And Connection - HAEGER Magic Micro 26 Mode D'emploi

English

Overview of the Components

1. Door lock
3. Turntable glass tray
5. Turntable roller
7. Control panel

Installation and connection

• Remove all packing material and accessories. Examine the oven for any damage
such as dents or broken door. Do not install if oven is damaged.
• Remove any protective film found on the microwave oven cabinet surface.
• Do not remove the wave guide cover that is attached to the oven cavity to protect
the magnetron.
• Select a level surface that provide enough open space for the intake and/or outlet
vents.
• Minimum installation height is 85 cm.
• The rear surface of appliance shall be placed against a wall. Leave a minimum
clearance of 30cm above the oven, a minimum clearance of 20cm is required
between the oven and any adjacent walls.
• Do not remove the legs from the bottom of the oven.
• Blocking the intake and / or outlet openings can damage the oven.
• Place the oven as far away from radios and TV as possible. Operation of microwave
oven may cause interference to your radio or TV reception.
2. Viewing window
4. Wave guide cover
6. Turntable shaft
4