Troubleshooting - Oceanic OCEACUF90W Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

VII. TROUBLESHOOTING
FAILURE
The freezer does not function.
The freezer is not cold enough.
The compressor starts and stops
frequently.
Vibrations
The freezer is making too much
noise.
POSSIBLE CAUSES
• The appliance is not plugged in
properly.
• The circuit breaker has tripped or
the fuse has blown.
• The thermostat is not set to a
suitable temperature.
• The ambient temperature may
require
you
thermostat.
• The door has been opened too
often.
• The door is not closed properly.
• The door seal is not completely
airtight.
• There is not enough space left
between the back and sides of the
appliance and its surroundings.
• The room temperature is higher
than usual.
• The freezer has been overfilled.
• The door has been opened too
often.
• The door is not closed properly.
• The thermostat has not been set
to the correct temperature.
• The door seal is not completely
airtight.
• There is not enough space left
between the back and sides of the
appliance and its surroundings.
• Check that the appliance is level.
• It is normal for the refrigeration
gas to produce a slight noise.
• At the end of each cycle, you
may hear bubbling noises from
57
to
change
the

Publicité

Chapitres

Table des Matières
loading

Table des Matières