ELECTRONIC SAW
•
The handle and the second handle are intact
•
The safety switch and the trigger work properly
•
The control circuit is working properly and has not been modified
•
Lubrication works properly
•
The depth of the slot of the tooth between the wheel and chain does not
exceed 0.5mm
•
Bar and chain are assembled correctly as specified in this manual
•
Any accessories used are conform and original
•
The oil cap is closed correctly
5. INTENDED USE
The tool is designed for pruning branches only.
A different use than indicated can damage the tool and cause dangers.
The tool is designed for adult use only, do not use in rainy weather or to work
on wet plants or bushes.
The manufacturer is not responsible for damages caused by the non-
observance of the instructions in this manual.
Check the correct tension and sharpening of the chain before using
the tool.
Damages caused by the use of not sharpened and / or incorrectly tensioned
chain are not covered by the warranty.
6. DESCRIPTION OF THE FEATURES
The tool is suitable for pruning branches and cutting small diameter trees. It
allows two-handed use thanks to the double handle, which allows to work
safely. It is recommended to comply with the warnings contained in this user
manual.
In case of danger or malfunction release the trigger, the chain will stop to
prevent damage or injuries.
www.kamikazevolpi.com
80