Oase Kit de Filtre complet 1300 Notice D'emploi page 5

- English -
Installation (cont.)
For installation using the nozzle set
1. Attach the nozzle tube with diverter valve to the filter kit.
2. Connect the desired fountain nozzle to the nozzle tube.
○ The nozzle tube is equipped with a telescopic function for
individual height adjustment.
If NOT using the diverter valve
3. Turn the diverter valve flow control completely
counterclockwise to a vertical position.
If using the diverter valve
3. Connect tubing to the diverter valve and then connect
the tubing to the additional water feature.
○ Turn the diverter valve flow control to adjust the flow to the
water feature.
NOTE: Tubing is NOT INCLUDED.
4. Place the unit in the pond as horizontal as possible on firm,
sludge-free ground and ensure that it is completely covered
with water at a maximum of 6.6 feet below the surface of the
water.
○ The nozzle tube with diverter valve is equipped with a 360°
pivoting base. If the pond ground is uneven, tilt the nozzle
tube to achieve a more vertical fountain display if a level
surface cannot be achieved.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
1.
diverter valve
flow control
2.
fountain nozzle
+
3.
-
stops flow to the
diverter valve
4.
nozzle tube
Filter kit
+
-
+
-
+
-
6.6 ft.
maximum
water feature
tubing
+
+
-
-
360° pivoting base
5