Installing The Front Shelf; Installing The Side Shelf - Navigator PIT BOSS PB1230G Guide De Montage

15. INSTALLING THE FRONT SHELF

Parts Required:
1 x Front Shelf (#38)
Ax4 Bx4 Cx4
Installation:
NSTALLING THE FRONT SHELF BRACKETS
• Place the Front Shelf on the Front Shelf Support Brackets. Note
Attach one front shelf bracket to the
illustration 15A as unfolded Front Shelf.
front of the grill barrel by using two
screws.
• Note illustration 15B as folded Front Shelf.
Install each screw half-way, then tighten
• Front Shelf can also be placed on the Bottom Support Plates and be used
completely when all two screws are mounted
and aligned properly.
as Bottom Plate. Note illustration 15C.
Repeat the same installation for the other
front shelf bracket.
Ax4 Bx4 Cx4
NSTALLING THE FRONT SHELF BRACKETS
Attach one front shelf bracket to the
front of the grill barrel by using two
screws.
Install each screw half-way, then tighten

16. INSTALLING THE SIDE SHELF

completely when all two screws are mounted
and aligned properly.
Parts Required:
Repeat the same installation for the other
Side Shelf (#14)
1 x
front shelf bracket.
Installation:
• Loosen the two pre-installed screws from the side of the Main Barrel.
Hook up the Side Shelf on the screws first then secure the two pre-
loosened screws into place.
• From underneath, secure the Side Shelf to the side panel of the Main
Barrel using two screws, washers, and locking washers.
17. INSTALLING THE COOKING COMPONENTS
Parts Required:
1 x Flame Broiler Main Plate (#4)
1 x Flame Broiler Slider (#3)
Flame Broiler Adjusting Bar (#5)
1 x
Flame Broiler Adjusting Bar Handle (#6)
1 x
1 x Smoke Adjusting Bar (#13)
Ax4 Bx4 Cx4
3 x Heat Tent (#7)
NSTALLING THE FRONT SHELF BRACKETS
4 x Porcelain-Coated Casted-Iron Cooking Grids (#2)
2 x Porcelain-Coated Upper Cooking Rack (#1)
Attach one front shelf bracket to the
front of the grill barrel by using two
Installation:
screws.
• Insert the Flame Broiler Main Plate into the main grill. Rest the Flame
Install each screw half-way, then tighten
completely when all two screws are mounted
Broiler Main Plate on the built-in ledge (on the inside right) of the
and aligned properly.
Main Grill that directs grease towards the grease bucket spout. Slide
Repeat the same installation for the other
front shelf bracket.
15A
15B
38
15C
16
MOUNTING THE FRONT SHELF
17A
4
MOUNTING THE FRONT SHELF
17B
3
4
14
10