Installing The Lid Stopper; Securing Support Plates And Caster Wheels; Securing Support Plates And Wheels - Navigator PIT BOSS PB1230G Guide De Montage

3. INSTALLING THE LID STOPPER

Parts Required:
2 x Lid Stopper (#8)
Installation:
• Secure the Lid Stopper onto the top of the Main Barrel using the pre-
installed screw on top of the Main Barrel.

4. SECURING SUPPORT PLATES AND CASTER WHEELS

Parts Required:
1 x Support Leg for Caster / Back (#20)
1 x Support Leg for Caster / Front (#21)
Left Front Support Leg Trim Piece (#22-1)
1 x
Left Back Support Leg Trim Piece (#22-2)
1 x
1 x Cart Side Panel (#27)
1 x Cart Support Girder / M (#30)
2 x Locking Caster (#23)
4 x Screw (#A)
Washer (#B)
4 x
Locking Washer (#C)
4 x
10 x Screw (#D)
Installation:
• Screw Left Front Support Leg Trim Piece to Support Left for Caster /
Front. Screw Left Back Support Leg Trim Piece to Support Left for Caster
/Back. Note illustration 4A.
• Affix Support Leg for Caster /Front and Support Leg for Caster /Back
assembled in previous step with Cart Side Panel connection with screws
(#D). Affix the Cart Support Girder M on the assembled parts in previous
step with washer, locking washer, and screws (#A). Note illustration 4B.

5. SECURING SUPPORT PLATES AND WHEELS

Parts Required:
1 x Support Leg / Back (#24)
1 x Support Leg / Front (#25)
2 x Wheel (#26)
1 x Cart Side Panel (#27)
Cart Support Girder / L (#31)
1 x
Screw (#A)
4 x
4 x Washer (#B)
4 x Locking Washer (#C)
4 x Screw (#D)
Wheel Cotter Pin (#H)
2 x
Wheel Washer (#G)
2 x
Wheel Axle Pin (#F)
2 x
Installation:
• Fix Support Leg/ Back and Support Leg/ Front with cart Side Panel with
screws (#D). Fix the Cart Support Girder L on the assembled member in
the previous step with washer, locking washer, and screws (#A).
7
3
8
4A
20
21
22-1
4B
27
D
30
ACB
23
5
24
D
BCA
F 31
26
G
H
H
G
8
22-2 D
ACB
23
25
27
F
26