ION Party Starter Guide D'utilisation page 6

Connecting with a Bluetooth Device
1. Turn on your Bluetooth device.
2. Press and hold the Power button for two seconds to power on Party Starter.
3. Open Bluetooth settings on your music device (smartphone, tablet, etc.).
4. Navigate to your Bluetooth device's setup screen, find Party Starter and connect.
5. If your Bluetooth device is not able to pair to Party Starter, press the Bluetooth Reset
button on Party Starter to break the previous Bluetooth connection and reset the
Bluetooth module.
6. The Paired LED will light up solid when it is paired.
7. To disconnect a paired Bluetooth device, press the Bluetooth Reset button on Party
Starter.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source. Also, try to
reduce the overall volume of Party Starter.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
6