General Safety Instructions; Safety Instructions For Operation; General Working Stand Safety Warnings; Personal Protective Equipment - Husqvarna DS150 Manuel D'utilisation

Let your Husqvarna dealer check the drilling machine
regularly and make essential adjustments and repairs.
All information and all data in the operator's manual
were applicable at the time the operator's manual was
sent to print.

General safety instructions

WARNING:
instructions that follow before you use the
product.
• This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. Before you use the product, you
must read and understand the contents of this
operator's manual.
• Save all warnings and instructions.
• Comply with all applicable laws and regulations.
• The operator and the employer of the operator must
know and prevent the risks during operation of the
product.
• Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
• Do not operate the product unless you receive
training before use. Make sure that all operators
receive training.
• Do not let a child operate the product.
• Only let approved persons operate the product.
• The operator is responsible for accidents that occur
to other persons or their property.
• Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine.
• Always be careful and use your common sense.
• Keep the product clean. Make sure that you can
clearly read signs and decals.
• Do not use the product if it is defective.
• Do not do modifications to this product.
• Do not operate the product if it is possible that other
persons have done modifications to the product.

Safety instructions for operation

WARNING:
instructions that follow before you use the
product.
• Use personal protective equipment. Refer to
Personal protective equipment on page 4 .
• Make sure that only approved persons are in the
work area.
• Keep the work area clean and bright.
• Make sure that you are in a safe and stable position
during operation.
4
Read the warning
Read the warning
• Do not use the product in bad weather conditions,
such as thick fog, heavy rain, strong wind or intense
cold. To do work in bad weather makes you tired and
can cause dangerous conditions, for example
slippery surfaces.
• Always examine the rear side of the surface where
the drill bit will go through the surface. Make the
work area safe. Cordon off the work area. Make sure
that no injury or damage can occur.
• Make sure that no material can become loose and
cause injury to the operator.
• Do not operate the product unless you can get aid if
an accident occurs.
• Sudden appearance of persons and animals can
prevent safe operation of the product. Always
operate the product carefully.
• Make sure that clothes, long hair and jewelry do not
get caught in moving parts.

General working stand safety warnings

WARNING:
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories. Accidental
starting of the power tool is a cause of some
accidents.
• Properly assemble the working stand before
mounting the tool. Proper assembly is important to
prevent risk of collapse.
• Securely fasten the power tool to the working stand
before use. Power tool shifting on the working stand
can cause loss of control.
• Place the working stand on a solid, flat and level
surface. When the working stand can shift or rock,
the power tool or workpiece cannot be steadily and
safely controlled.
• Do not overload the working stand or use as ladder
scaffolding. Overloading or standing on the working
stand causes the stand to be "top-heavy" and likely
to tip over.

Personal protective equipment

WARNING:
instructions that follow before you use the
product.
• Always use correct personal protective equipment
when you operate the product. The personal
protective equipment does not erase the risk of
injury. The personal protective equipment decreases
the grade of injury if an accident occurs. Let your
dealer help you select the right equipment.
• Use approved eye protection while you operate the
product.
Read all safety warnings
Read the warning
1341 - 003 - 27.10.2021