Kerbl 29923 Mode D'emploi page 21

Balance de table 30 kg
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.0 OPERATION INSTRUCTION
4.1 Power on
Turn on the power, and the scale auto-check from 0 to 9 sequentially. Then it will show voltage of
for 2 seconds and go to weighing status.
4.2 Zeroing
If the value of weighing is not zero (0 is not appears) before weighing,
Press [ZERO], 0 will come.
Note: the zero range is 4% of max capacity.
4.3 Units Selection:
Select the current unit in the weighing mode by press [UNIT] key.
4.4 Tare Function.
Put the container on pan, press [TARE] key, the display will show the tare light.
A) Move the container it will show minus weight.
B) Press [TARE], it will show zero then gone.
4.5 Counting function (only functions if you have the Unit "kg"):
A) in weighing state, press a sample weight( the weight should over 0.001 of the Max capacity.) Press
[mode] go to the counting setting mode, then it will display the sample number.
B) Press [zero] to add the sample number and [tare] to reduce the umber. 10 pcs will be added or redu-
ced for one time. If you hold the key for one second, the number will change one by one.
C) confirm the sample weight. To press [mode] go to counting status. Now it will display the actually
weight number.
D) press [mode] to go back to weighing status.
4.6 Counting function with an empty container (only functions if you have the Unit "kg"):
A) Before you switch on the scale please put the empty container onto the display and keep the button
‚ZERO'. If you keep the button ‚ZERO', please put the ‚ON-button'.
B) in weighing state, press a sample weight( the weight should over 0.001 of the Max capacity.) Press
[mode] go to the counting setting mode, then it will display the sample number.
C) Press [zero] to add the sample number and [tare] to reduce the umber. 10 pcs will be added or redu-
ced for one time. If you hold the key for one second, the number will change one by one.
D) confirm the sample weight the press [mode] go to counting status. Now it will display the actually
weight number.
E) press [mode] to go back to weighing status.
21

Publicité

Chapitres

Table des Matières
loading

Table des Matières