Battery Care; Rotor Replacement - ACME Prime Q250 Raider Manuel D'utilisation

Battery care

To ensure a long battery life, please follow these steps:
- Never store the model in activated mode, make sure it is switched off.
- Only store with charged battery (min. 85% capacity)
- Disconnect the battery from the model
- Store at room temperature
- When not using, make sure the battery will be charged every 3 months
If these steps are not being followed, the battery might get damaged.

Rotor replacement

You can replace the rotors in a few steps.
Remove the screw by using the supplied screw driver. Pull off the rotor from the axis.
Make sure you are mounting the right propeller (direction A or B) and that the drive shaft is connected
to the gears. Remount the cap of the rotor and righten it firmly.
Direction of rotation clockwise (Rotor A): left front and right rear
Direction of rotation counter-clockwise (Rotor B): right front and left rear
Troubleshooting
Error
The model does not
react on the
commands
The model makes
strange sounds
The controller has no
connection to the
model
The model shows a
weak performance
You can contact us anytime if you have further problems!
Please find our details at the "Service & Support" section.
www.ACME-online.de
Source
Controller batteries are not
inserted correctly.
Batteries are empty
Model battery is empty
Blades/ Gears are
damaged
Weak battery
Controller batteries are
empty
Battery damaged
The model is out of range
The motor is worn out
ACME the game company
Solution
Check the battery
Replace the batteries
Charge the battery
Check these and replace them if needed
Charge the battery
Replace the batteries
Replace the battery
Check all motors and replace it if needed