Appliance Description - Beurer MG 90 Mode D'emploi

• Never leave the device unsupervised, particularly if children are around.
• Never use the device under covers, such as blankets or pillows.
handling
cAutION
Switch the device off and disconnect the power supply after every use and before every cleaning.
• Make sure that all moving parts can move freely at all times.
• Make sure that no hair can get caught in the device.
• Avoid contact with sharp or pointed objects.
• Do not kink the cable.
• Make sure that the device is not too close to heat sources such as ovens, radiators or direct sunlight.
Disposal
cAutION
Follow local regulations regarding the disposal of materials. The appliance should be disposed of
according to Regulation 2002/96/EC-WEEE (Waste Electrical and Electronic Equipment). In case of
queries, contact the municipal authorities responsible for waste disposal in your area.

4. Appliance description

G
H
A
I
5. start-up
• Remove the packaging..
• Check the device, power supply and cables for damage.
• Connect the device to the mains power supply. The device must be switched off.
• Route the cable safely so that there is no risk of anyone tripping over it.
6. Operation
Ensure that the device is switched off before plugging in the mains cable. Switch on the device using the On/off
button. The start program starts.
The massage speed can be increased/decreased by one setting as required by pressing the "Speed" button.
You can choose between 3 different massage programs (with automatic speed settings) by pressing the
"Programs" button.
- Relax: A wave-action, relaxing massage.
- Refresh: Vibrant and pulsating massage..
- Active: Penetrating and pulsating massage.
F
E
D
C
B
J
A On/off button
B Heat
Heat function
C Speed
Adjustability of massage speed
D Indicator lamp
Heat function
E Massage speed display
F Programs
Selection of different massage programs
G Massage program
H Additional handle
I Massage surface with heat function
J Interchangeable massage attachments
9