Electrical Installation - Luxair LMT430SB Instructions D'installation Et Guide De L'usager

ELECTRICAL INSTALLATION

WARNING
This range hood must be properly grounded. Turn off electrical power at service entrance before
wiring. Check to make sure that the electric chord is not in contact with thee sharp edges of the
appliance.
Improper grounding can result in a risk of electric shock. Consult a qualified electrician if the
grounding instructions are not completely understood, or if doubt exists as to whether the
appliance is properly grounded. Do not use an extension cord. If the power supply cord is too
short, have a qualified electrician install an outlet near the appliance.

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. This appliance is
equipped with a cord having a grounding wire with a grounding plug. The plug must be
plugged into an outlet that is properly installed and grounded.

Set the electrical power supply within the space covered by the decorative chimney.
 Position the outlet offset so that the power cord will not interfere with the round duct.
 Make sure this does not interfere with a mounting bracket fastening area or with the
decorative chimney (where the chimney touches the wall)