Switching On The First Time - Vimar TAB 7 IP Guide Rapide

TAB: 40605

Switching on the first time

The device, when correctly wired and powered up but not configured, displays the following screen on which are shown: IP
address (automatic link-local address temporary), MAC address, system ID, firmware version. By default, all the devices have
ID 00.00.000 that is a non-specified ID: to simplify system configuration via Video Door IP Manager, the installer can set the
ID on each device by pressing the central button under the screen and assigning the desired ID. Select an unequivocal ID for
each user; assign the same ID to all the video entryphones belonging to the same user.
The configuration and activation of the device is to be completed by the installer using the software Video Door IP Manager
(refer to the documentation for the VDIPM).
11
EN