Établissement De L'emplacement De La Plaque Murale - Frigidaire Gallery Série Instructions D'installation

ÉTABLISSEMENT DE L'EMPLACEMENT DE LA PLAQUE MURALE SOUS
C.
VOTRE ARMOIRE
Emplacement de la plaque - sous une armoire
à fond plat
NOTE:
READ IT IS VERY IMPOR
IN THE AND FOLLO TANT
BEFOR INSTA LLATIO W THE DIREC TO
REAR E PROCE N INSTR TIONS
WALL TEMPL EDING WITH THIS UCTIO NS
This Rear Wall Template ATE. 3/8" TO EDGE
mounting plate and serves 12"
outlet. to locate the horizonta to position the bottom
1. Use a level to check l exhaust
2. Locate accuratel y. that the template
right side and mark at least is positione d  
 of the centerline one stud on the left 4"  
screw mounted It is important . or  
of the microwav firmly in to use at least one  
locations for the supplied e. Mark a stud to two additiona support wood      
3. Drill holes toggle bolts. l, evenly the weight    Trim the
a stud, drill a 3/16" in the marked locations spaced  rear wall templa
that do not line hole for wood screws. . Where there is te along
 toggle bolts. up with a stud, drill 5/8" For holes   the dotted
AT THIS DO NOT holes for   line.
4. Remove TIME. INSTALL THE MOUNTI  
5. Review the template NG PLATE  
installatio the Installatio from the rear wall.
n situation. n Instructio n book
for your
Darle vuelta
versión a la hoja
en Español . para consulta
r la

Locate and mark    
mounti holes to     
IMPOR ng plate. align with holes in     
TANT: the       
LOCAT E AT LEAST    
THE CENTE ONE STUD  
MARK RLINE ON EITHE
THE LOCAT . R SIDE     
SPACE D TOGG ION FOR OF
AREA. LE BOLTS 2 ADDIT IONAL
IN THE , EVENL    
MOUN TING PLATE Y
  
Trim the
rear wall
templa te along
the dotted
line.

Locate
and mark
 mounti ng plate. holes to align with
IMPOR holes in
TANT: the
LOCAT E AT LEAST
THE CENTE ONE STUD
MARK RLINE . ON EITHE
THE LOCAT R SIDE OF
SPACE D TOGG ION FOR 2 ADDIT
 AREA. LE BOLTS IONAL
IN THE MOUN , EVENL Y
TING PLATE


C
Emplacement de la plaque - sous une
NOTE
READ : IT IS VERY
AND FOLLO IMPOR
IN THE INSTA W THE TANT TO
BEFO RE PROC LLATI ON DIREC TIONS
REAR WALL EEDIN INSTR UCTIO
This Rear TEMP G WITH THIS NS
mounting Wall Template LATE. 3/8" TO EDGE
outlet. plate and to locate serves to position 12"
1. Use the horizonta the bottom
accurate a level to check l exhaust
2. Locate ly. that the template
right side and mark at least is positione d  
  I t is importan of the centerlin one stud e. on the 4"
screw mounted t to use left or  
of the microwa firmly in a stud at least one wood    
locations for the ve. Mark two additiona to support the weight    
3. Drill holes in supplied toggle l, evenly  
a stud, drill a 3/16" the marked locations bolts. spaced     Trim the
that do not line hole for wood screws. . Where there is rear wall
 toggle bolts. up with a stud, drill 5/8" For holes  templ ate along
AT THIS D O NOT  holes for   the dotted
4. Remove TIME. INSTALL THE MOUNT   line.
5. Review the template ING PLATE  
installatio the Installati from the rear wall. 
n situation on Instructio n book
. for your
Darle vuelta
versión a la hoja
en Españo para consult
l. ar la
Locate  
and mark    
mount ing plate. holes to align with    
IMPOR holes in      
LOCA TANT: the      
TE AT     
THE CENT LEAST ONE STUD  
MARK ERLIN E. ON EITHE
THE LOCA R SIDE       
SPAC ED TOGG TION FOR OF
AREA . LE BOLTS 2 ADDIT IONAL
IN THE , EVEN    
MOUN TING PLATE LY
   
Trim the
rear wall
templ ate
along the dotted
line.

 Locate
mount and mark holes to
ing plate. align with
IMPOR TANT: holes in
LOCA the
TE AT LEAST
THE CENT ERLIN ONE STUD
MARK THE LOCA E. ON EITHE
SPAC TION FOR R SIDE OF
 ED TOGG 2 ADDIT
AREA . LE BOLTS IONAL
IN THE MOUN , EVEN LY
TING PLATE
Instructions d'installation
16-1/ 2 "
Tracez une ligne verticale sur
le mur au centre de l'espace
de 30 po de large.
Tape gabarit pour mur arri è re
sur le mur correspondant à la
ligne m é diane et en touchant
le bas de l'armoire.
Tracez une ligne sur
le mur arrière égale à
la profondeur de le
surplomb avant
NOTE:
READ AND FOLLOW IT IS VERY IMPORTAN
IN THE BEFORE INSTALLAT ION INSTRUCT THE DIRECTION T TO
REAR This Rear WALL PROCEEDI TEMPLATE NG WITH IONS S
outlet. mounting plate and Wall Template serves . THIS 12" 3/8" TO EDGE
1. Use accurately. a level to check to locate the horizontal to position exhaust the bottom
2. Locate right side and mark at least that the template is positioned
screw mounted  It is important of the centerline. one stud on the left or 4"  
locations of the microwave. firmly in Mark two a stud to use at least to support one wood     
3. Drill a stud, for the holes in the marked supplied toggle additional, bolts. evenly spaced the weight    Trim the
toggle that do drill a 3/16" not line up with hole for locations. wood screws. Where there is  rear wall template
AT THIS  DO NOT bolts. INSTALL a stud, drill 5/8" For holes holes for   along the dotted
5. Review 4. Remove TIME. the template THE MOUNTING PLATE   line.
installation the Installation situation. from the Instruction rear wall. book for 
your
versión Darle vuelta en Español. a la hoja para consultar
la

Locate mounting and mark holes to     
IMPORTAN plate. align with holes in the    
LOCATE THE CENTERLIN T: AT LEAST      
MARK THE LOCATION E. ONE STUD ON EITHER  
SPACED TOGGLE FOR 2 SIDE OF    
AREA. BOLTS IN THE ADDITIONA MOUNTING L, EVENLY
PLATE   
 
Trim the
rear wall template
along the dotted line.

 mounting Locate and mark holes
IMPORTAN plate. to align with holes in the
THE CENTERLIN LOCATE AT LEAST T:
MARK THE LOCATION E. ONE STUD ON EITHER
 SPACED TOGGLE FOR 2 SIDE OF
AREA. BOLTS IN THE ADDITIONA MOUNTING L, EVENLY
PLATE


C
À 30 po de la surface de cuisson
Emplacement de la plaque - sous une armoire
dotée d'un rebord
NOTE :
READ IT IS VERY
IN THE AND FOLLO IMPOR TANT
INSTA W THE DIREC TO
BEFOR E PROC LLATIO N INSTR TIONS
REAR WALL EEDIN G WITH UCTIO NS
This Rear TEMP LATE. THIS 3/8" TO EDGE
mounting Wall Template 12"
outlet. plate and to locate serves to position
1. Use a level the horizonta the bottom
accurate to check that the l exhaust
2. Locate and mark ly. template is positione
right side at least d 4"  
  I t is importan of the centerline one stud . on the left  
screw mounted t to use or    
of the microwav firmly in a stud to at least one wood   
locations for the supplied e. Mark two additiona support the weight   
3. Drill holes in the marked toggle bolts. l, evenly   
a stud, drill a 3/16" locations spaced
that do not line hole for wood screws. . Where there is
  toggle bolts. up with a stud, For holes  
D O NOT drill 5/8" holes for  
AT THIS TIME. INSTALL THE MOUNTI  
4. Remove 5. Review the template NG PLATE
the Installatio from the
installatio n situation. n Instructio rear wall.
n book for your
Darle vuelta a la hoja
versión en Español para consulta
. r la
 
Locate and mark    
mounti holes to     
ng plate. align with      
IMPOR TANT: holes in the    
LOCAT   
THE CENTE E AT LEAST  
RLINE ONE STUD
MARK THE LOCAT . ON EITHE R SIDE     
SPACE ION FOR OF
D TOGG 2 ADDIT
AREA. LE BOLTS IN THE IONAL , EVENL    
MOUN Y
TING PLATE
   
Trim the
rear wall
templa te along
the dotted
line.



C
Tracez une ligne verticale sur le mur au centre de l'espace de
30 po de large.
Tape gabarit pour mur arri è re sur le mur correspondant à la
ligne m é diane et en touchant le cadre bas de l'armoire.
Vos armoires peuvent être dotées de garnitures
décoratives qui entravent l'installation du micro-ondes.
Enlevez l'élément décoratif pour installer convenablement
le four à micro-ondes et pour vous assurer qu'il est de
niveau.
LE FOUR À MICRO-ONDES DOIT ÊTRE DE NIVEAU.
Utilisez un niveau pour vous assurer que le fond de
l'armoire est de niveau.
Si les armoires sont dotées uniquement d'un rebord avant,
sans rebord sur les côtés ou à l'arrière, installez la plaque de
montage plus bas, à la même distance que le rebord avant
de l'armoire. Ainsi, le four sera de niveau.
1
Mesurez la hauteur intérieure du rebord avant de
l'armoire.
2
Tracez une ligne horizontale sous le fond de l'armoire,
sur le mur arrière à une distance équivalente à la
longueur intérieure du rebord avant de l'armoire.
3
Pour l'installation sous une armoire dotée d'un rebord
avant uniquement, alignez les languettes de montage
sur cette ligne horizontale, sans qu'elles touchent le
fond de l'armoire, tel que décrit à l'étape D.
FR-7
 Trim the
rear wall templa
te along
the dotted
line.
 

 
 
Locate
mount ing and mark holes to
plate. align with
IMPOR TANT: holes in
LOCAT the
E AT LEAST
THE CENTE ONE STUD
MARK RLINE . ON EITHE
SPACE THE LOCAT R SIDE OF
D TOGG ION FOR 2 ADDIT
AREA. LE BOLTS IONAL
IN THE MOUN , EVENL Y
TING PLATE


À 30 po de la surface de cuisson