Tools You Will Need; Mounting Space - Frigidaire Gallery Série Instructions D'installation

TOOLS YOU WILL NEED

# 1 Phillips screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles

MOUNTING SPACE

"
13 Maximum (33 cm)
"
30 (76.2 cm)
66 (167.6 cm)
or More from
the Floor to the
Top of the
Microwave
Installation Instructions
Pencil
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Bottom Edge of
Cabinet Needs to
be 30 (76.2 cm)
or More from the
Cooking Surface
"
30
(76.2 cm)
min.
Backsplash
Ruler or tape measure and
straight edge
" "
Electric drill with 3 ⁄ , 1 ⁄ and 5 ⁄
16 2 8
drill bits
Stud finder or Hammer (optional)
Level
NOTES:
•
The space between the cabinets must be
30" (76.2 cm)wide and free of obstructions.
•
If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
•
When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
•
As a guide to installation, see page 24 for Mounting
Template Information.
•
If the cabinet depth including the cabinet doors
is more th n 13' " " ' th n the unit must be spaced a
out from wall using adequate materials supporting
150 Ibs to allow proper top vent air exhaust/intake.
Cabinet
EN-5
Carpenter square
(optional)
"
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking tape
e
Cabinet