König Electronic KN-HDMISW04 Mode D'emploi page 2

ENGLISH
Introduction:
This is a digital A/V switching device; it switches and transmits A/V signals from an to devices using
the HDMI format. To use this device you don't need to connect any extra cables or complex control
boxes. This switch allows you to enjoy you audio/video in the best possible quality.
Features:
• Single link range 1080p (max) from video source
• HDMI input connector: 4x HDMI type A 19pin female
• HDMI output connector: HDMI type A 19pin female
• HDMI HDCP compliant: any switch must pass HDCP data between source and screen
• Operation: Mechanical via 4 buttons
• Plug and play, no software installation required, installs very quickly
• Backwards compatible with DVI-D
• Backwards compatible with all DVI devices
Setup:
• Connect a HDMI cable to the HDMI output of an output device such as a DVD player or STB
• Connect the other end of the HDMI cable to the input port of this switch. Remember which device is
connected to which input port
• Turn on the devices and TV and select the source device you want to display on your TV
Operation:
Input side needs to correspond to the front, only press one button at a time.
Connections:
Rear
Front
1) HDMI output port
2) HDMI input port 4
3) HDMI input port 3
4) HDMI input port 2
5) HDMI input port 1
2