Emptying The Dust Cup - Euro-Pro Shark NR120C 31 Manuel Du Propriétaire

Emptying the Dust Cup

For best results empty the Dust Cup
after each use; empty several times
during prolonged usage or when it
reaches the MAX fill line.
NEVER OVER-FILL THE DUST
CUP.
Always unplug the vacuum
from the electrical outlet before
removing and emptying the dust cup.
To empty the Dust Cup:
1
Grip carry handle and press the Dust
Cup release button to remove and
lift the dust cup up. (Fig. 9)
2
Option A: For Quick Empty:
Insert Dust Cup deep inside trash
receptacle to contain dust and
debris.
Press the bottom Dust Cup release
button; tap container gently to
dislodge and release dust and
debris. (Fig. 10)
Snap door in place.
NR120C_31_IB_E_F_120710_2.indd 7
fig. 9
fig. 10
3 Option B: For Allergy Sufferers:
Wrap a trash bag around the Dust
Cup leaving space at the bottom for
the door to swing open.
Locate the Dust Cup Door release
button within the trash bag and
press to release as you shake the
dust cup to empty dust and debris.
Snap the bottom door in place.
Note: Option B can also be
performed outside of the home to
further minimize releasing dust back
into the air. Carry just the Dust Cup
and trash bag outside.
Bottom Dust
Cup Release
fig. 11
Note: Some dust and debris may
remain in the top of your dust cup
on or near the screen. It is not
necessary to completely remove
this material before continuing to
vacuum; Shark
action will sweep the screen clean
once you begin to refill your dust
cup. If you wish to clean the cyclonic
chamber:
4
Hold the dust cup and twist the
dust cup handle counter clockwise
and lift up to remove the cyclonic
chamber. (Fig. 11)
5
To replace the cyclonic chamber
back into the dust cup, insert it into
the dust cup and twist clockwise.
Make sure that the "Lock" arrows
on the cyclonic chamber align with
the arrows on the dust cup to lock
in place. (Fig. 12)
www.sharkclean.com
English
CAUTION:
Unplug the vacuum;
failure to do so might
result in electric
shock.
fig. 12
advanced cyclonic
®
7
12-07-10 3:01 PM