Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
VCL 1508
CLEANING AND MAINTENANCE
ALWAYS disconnect the power
plug from the socket before
performing maintenance and/
or cleaning operations.
• For the appliance external parts cleaning use a damp cloth avoiding using abrasive
detergents.
Never immerse the motor body (1) in water or other liquids.
Never wash the motor body (1) using a water jet.
•
The appliance aspiration capacity depends on the air filtering systems conditions too.
Container (4) cleaning
• Do not fill the container (4) beyond the indicated MAX level. (Fig. F15)
• Press the button (8) and remove the container (4). (Fig. F16)
• Place yourself on a rubbish collector.
• Press the lever (25) to open the cover (4b). Empty the container (6). (Fig.F17)
• Correctly close the container (4).
Cleaning the filters
• Press the lever (6a) to open the lid (C). (Fig.F18)
• Remove the HEPA filter (14a) and the round filter (14b). (Fig.F19)
• Clean both filters by beating them in a waste container (basket, etc.).
If it's necessary, blow them with air paying attention not to damage them.
• If it's necessary, clean the round filter (14b) with water and mild soap; rinse it abundantly
with water.
Wait for the filter to be completely dry before
placing it on the container (4) again.
To let it dry for at least 24 hours is advised.
Do not wash the HEPA filter (14a). If it's tired, replace it.
EN
47
Publicité
Table des Matières
