Additional Information; Specifications - Pioneer GM-D8500M Mode D'emploi

Additional information

Specifications

Power source ............................. 14.4 V DC (10.8 V to 15.1 V
Grounding system ................... Negative type
Current consumption ............ 27 A (at continuous power,
Average current drawn ......... 7.5 A (4 W for one channel)
Fuse ................................................ 30 A × 2
Dimensions (W × H × D) ... 310 mm × 56 mm × 200
Weight .......................................... 2.8 kg (Leads for wiring not
Maximum power output ....... 600 W × 1 (4 W) / 1 200 W ×
Continuous power output ... 300 W × 1 (at 14.4 V, 4 W, 20
Load impedance ...................... 4 W (2 W to 8 W allowable)
Frequency response ............... 10 Hz to 240 Hz (+0 dB, -3
Signal-to-noise ratio ............... 80 dB (IEC-A network)
Distortion ..................................... 0.3 % (10 W, 100 Hz)
Low pass filter:
Cut off frequency ........... 40 Hz to 240 Hz
Cut off slope ..................... -12 dB/oct
Bass boost:
Frequency .......................... 50 Hz
Level ..................................... 0 dB to 12 dB
Gain control:
RCA ...................................... 200 mV to 6.5 V
Speaker .............................. 0.8 V to 26 V
Maximum input level / impedance:
RCA ...................................... 6.5 V / 22 kW
Speaker .............................. 26 V / 90 kW
Notes
! Specifications and the design are subject to
modifications without notice.
! The average current drawn is nearly the maxi-
mum current drawn by this unit when an
audio signal is input. Use this value when
working out total current drawn by multiple
power amplifiers.
allowable)
4 W)
15 A (2 W for one channel)
mm
included)
1 (2 W)
Hz to 240 Hz, ≦ 1% THD)
600 W × 1 (at 14.4 V, 2 W, 50
Hz, ≦ 1% THD)
dB)
Appendix
13
En