Accessories; Scrapping And Disposal; Improper Use - Beta 3061/2T Mode D'emploi

INSTRUCTIONS FOR USE

ACCESSORIES

- The jack can be supplied with two extensions or height adaptors (long extension 100 mm, short extension 50 mm.)
NEVER USE MORE THAN TWO EXTENSIONS!
THE MANUFACTURER IS NOT LIABLE FOR ANY DAMAGE RESULTING AS A CONSEQUENCE
OF DISREGARD FOR THE ABOVE INDICATIONS AND THE WARRANTY CONDITIONS ARE
INVALIDATED THEREOF!

SCRAPPING AND DISPOSAL

- The lubricants must be disposed of in compliance with the anti-pollution laws in force.
- Scrapping the jack and its component parts must be carried out by the user in accordance with current laws.
USE
- Expressly observe the safety rules already described in this manual.
1. Position the jack under the supports as described in the manual of the vehicle.
the manufacturing company is not responsible for any break or damage to the lifted vehicle or to persons
or property due to an incorrect use of the jack.
2. Press the right key on the distributor box for lifting. DWG. 8
3. Press the left key on the distributor box for lowering.
- After lifting the load, it is absolutely essential to rest it on the support stands before doing any work under it.
REMEMBER THAT THE JACK IS A LIFTING DEVICE AND NOT A SUPPORTING DEVICE!!
- The operator's employer will have to provide the necessary training and furnish the necessary information
about the pumping and shifting forces.
- %HIRUH ZRUNLQJ ZLWK WKH MDFN LW LV DGYLVDEOH WR SHUIRUP D IHZ RSHUDWLRQV ZLWK QR ORDG LQ RUGHU WR DFTXLUH
WKH VHQVLWLYLW\ QHFHVVDU\ WR ZRUN VDIHO\ ZLWK WKH MDFN

IMPROPER USE

The air-hydraulic jack has been designed and made to lift transport vehicles. Any other use of the jack, such as
IRU LQVWDQFH OLIWLQJ DQGRU PRYLQJ SHUVRQV LV FRQVLGHUHG WR EH GH¿QLWHO\ LPSURSHU
Any use of the jack not in conformity with the safety rules listed in this manual is considered to be improper use.
EN
9