Montiss CVC644 Mode D'emploi page 18

TROUBLE SHOOTING
PROBLEM POSSIBLE REASON
handheld 1. batteries discharged.
vacuum 2. dead battery(battery won't hold
cleaner does charge).
not work
4. no power in electrical outlet
supplying transformer.
5. charger is plugged in.
6. System is protected.
Power floor 1. the rolling brush is blocked with
brush does debris or string etc.
not work
2. the belt is broken.
3. handheld vacuum cleaner is not
connected correctly.
handheld 1. dust container is full.
vacuum 2. Dust filter needs cleaning or
replacement.
cleaner
cannot pick- 3. unit needs recharging.
up dust;
suction
power
become
weak
Dust leak 1. dust container is full.
from 2. dust filter is not installed
handheld
correctly.
vacuum 3. puncture/hole in dust filter
cleaner
Battery can battery has reached the end of its
not be service life.
charged
Hear strange check whether the floor brush and
noise when dust filter is blocked by big dust;
the appliance check whether dust container is full.
work
POSSIBLE SOLUTION
1. charge unit.
2. call customer service or
dispose of unit.
4. check fuse or breaker,
replace fuse/reset breaker.
5. unplug charger.
6. activate the system with
the charger.
1. remove debris from rolling
brush. If there is string or
thread wrapped cut gently
with scissors.
2. call customer service
3. connect the handheld
vacuum cleaner correctly.
1. empty dust container
2. remove dust filter assembly
and check for object(s) in
suction inlet and remove.
Clean or replace dust filter
assembly.
3. charge unit.
1. empty dust container
2. Review the dust filter
assembly installation
instructions.
3. replace dust filter assembly.
Call customer service
stop to use the appliance right
now; clean the dust filter
assembly and floor brush,
empty the dust container. If
the problem cannot
disappear, pls call service.
18