Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Opening Dimensions
NOTE: The water hookup and electrical outlet must be placed
near the bottom of the refrigerator. The recommended grounded
electrical outlet and water connection should be installed in the
shaded area as shown. For specifications, see the "Electrical
Requirements" or "Water Supply Requirements" section. If the
recommended water line location is used, no additional plumbing
needs to be purchased.
1
13
1
/
"
4
(34 cm)
2
12
(32 cm)
2"(5 cm)
3
1
2
/
(6.5 cm)
1. Minimum fixed wall position
2. For full-overlay cabinet doors and a trim kit, the
height of the opening must be 72
3. Recommended locations for electrical and water
connections
Door Swing Dimensions
Location must permit doors to open to a minimum of 150°. Allow
13¹⁄₄ in. (33.7 cm) minimum space between the side wall and the
freezer side of the refrigerator. Allow 16¹⁄₂ in. (41.9 cm) minimum
space between the side wall and the refrigerator side.
NOTE: Dimensions may vary based on model.
13
1
/
"
4
(33.7 cm)
2
1
/
"
8
(5.4 cm)
41
/
"
3
4
1
/
"
2
(106 cm)
(12.7 mm)
90˚
4
36"
(91.5 cm)
16
1
(42 cm)
72"
(182.9 cm)
1
/
"
20
1
/
"
2
4
(51.5 cm)
2"
(5 cm)
"
9
1
/
"
2
4
(23.5 cm)
¹⁄₈
in. (183.2 cm)
16
1
/
"
2
(41.9 cm)
1
/
"
4
(6.4 mm)
150˚
Factory Door Panels and Side Trim Kits
All factory parts are available through your Whirlpool dealer or by
calling Whirlpool Parts and Accessories at 1-800-442-9991. In
Canada, call 1-800-807-6777.
Decorator Door Panel Kits
Decorator door panels kits are available. Follow the kit
instructions for installing the panels.
Order Kit Number:
White - #4378123
Black - #4378124
Biscuit - #4378125
Stainless Steel - #4396295
Cabinet Side Trim Kits
Cabinet side trim kits are available to customize refrigerator to
cabinet face. Follow the kit instructions for installing the side
panel.
Order Kit Number:
1
White - #2208187W
Black - #2208187B
/
"
Biscuit - #2208187T
2
Stainless Steel - #2208187S
Custom Door Panels
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinet maker or
carpenter. See dimensional drawings for panel specifications.
IMPORTANT: Panels weighing more than the recommended
weight may cause damage to your refrigerator. Refrigerator door
panel should not exceed 28 lbs. (12.7 kg). Freezer door panels
should not exceed 21 lbs. (9.5 kg).
You can create panels by screwing or gluing wood panels to ¹⁄₄ in.
(6.35 mm) plywood backing or by using ³⁄₄ in. (19.05 mm) stock
with routed edges.
1
43
3
/
"
8
(110.2 cm)
1 ¹⁄₈ in. x ¹⁄₈ in. (3.2 x 3.2 mm) chamfer
Door and Side Panels
15
3
/
"
8
(39.1 cm)
(48.5 cm)
3
23
/
"
4
(60.3 cm)
67
15
/
"
16
(172.5 cm)
15
3
/
"
8
(39.1 cm)
29
13
/
"
16
(75.7 cm)
required on installations with custom panels
or installation using ¹⁄₄ " backer material.
19
3
/
"
32
1
Publicité
Table des Matières
