Oeprating The Radio - Aux-In; Loudness; Tone (Bass/Treble Settings); Languages - PERFECTPRO WORKMAN 2 Manuel De L'utilisateur

OPERATING THE RADIO – AUX IN
A 3.5mm stereo Aux In socket is provided on the side behind the rubber cover, for
connecting an external audio device such as MP3 player or CD player (not included).
1. Connect a stereo or mono audio source to the Aux In socket.
2. Press the Source button to select AUX input. Display will show "AUX IN".
3. Play the external player.
4. Adjust the volume of both the radio and the player for comfortable listening.
Notes: Never use the Aux-In socket in rainy or moist conditions to prevent moist from
entering the radio. Keep the rubber cover well closed under these conditions.
The Auto-Power management function will be activated in AUX IN mode. If there
is no signal* from the Aux-In socket for a period of over 15 minutes, the radio will
automatically switch to standby mode. Pressing the On/Off button will wake up the unit.
* Also when the incoming signal from the external device is too low and cannot be
detected for a period of over 15 minutes by the Auto-Power management, the radio will
switch to standby mode.
To prevent this raise the output level of the external device enough to be detected.

LOUDNESS

The Loudness function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is on a lower volume level (Dynamic
Loudness).
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, the display shows "System".
3. Rotate the Tuning knob until the display shows "Loudness".
4. Press the Tuning knob; the display shows "Loudness On".
5. Rotate the Tuning knob to select between "Loudness On" or "Loudness Off".
6. Press the Tuning knob to confirm the setting and return to normal display.

TONE (BASS/TREBLE SETTINGS)

The Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the On/Off button to turn on the radio.
2. Press the Volume knob, the display shows "BASS 0".
3. Rotate the Volume knob to set the desire Bass level.
Press the Volume knob to confirm, the display shows "TREBLE 0".
4.
5. Rotate the Volume knob to set the desire Treble level.
6. Press the Volume knob to confirm and return to normal display.
9

LANGUAGES

The menu of the radio can be configured to various languages.
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, the display shows "System".
3. Rotate the Tuning knob until the display shows "Language".
4. Press the Tuning knob to enter the language adjustment menu.
5. Rotate the Tuning knob until the desired language appears on the display (default
is English).
6. Press the Tuning knob to confirm your choice. The display menu will change to the
chosen language.

BACKLIGHT

When the radio is in operation or in standby, pressing any button will illuminate the LCD
display for approx. 10 seconds.

ATP PASSCODE

This radio is equipped with an Anti-Theft-Protection system (ATP system). When the
ATP system is enabled, a passcode is required for turning on the radio.
1. Press the On/Off button to turn on the radio.
2. Press the Menu button.
3. The display shows "System".
4. Rotate the Tuning knob until the display shows "Passcode". Press the Tuning knob.
"Enable" or "Disable" will be displayed, to enable ATP, turn and press Tuning knob
to select "Enable".
5. "Change Passcode" will be displayed, enter a 4-digits numeric passcode by
pressing the preset buttons (1-10)
6. "Confirm Passcode" will be displayed. Enter a second time the same passcode to
re-confirm.
7. To disable passcode, select "Disable" as previously showed. And re-enter the
previous passcode to disable the lock.
When ATP is enabled, and if wrong passcode is entered for three times, a timer will be
activated. The next attempt will be possible only after the timer has elapsed. The timer
period will be increased with further wrong passcodes.
WARNING: If you choose to activate the passcode, please note your passcode
somewhere safe as a memory back-up in case you should forget it. This as there
is no way to reset the radio should the passcode be forgotten!
GB
G B
10