Guardian MDS86800XW Mode D'emploi Et Garantie page 5

6. Flip the rollator up on its side as in Figure 2 above.
7. Insert the front wheel (G) into the front wheel receptacle (Fig 5 and Fig 6).
Fig 5
8. Make sure the bolt on the side of the insert goes all the way into the slot (Fig 7).
Fig 7
9. Insert the round hand screw (J). Make sure the threaded portion of the round hand screw is
underneath the bolt in the side of the insert (Fig 8).
Fig 8
MDS86800XW (PIC-00311)
Revised: 08/31/18
Fig 6
5