Protective lid warning
A window is displayed to enable
Select the required setting and confirm with
Display
Press
surrounding light conditions.
Sound
Press
The icon
in the display shows the adjusted sound level.
T–Set
Press
to select the calibration mode.
The calibration mode allows you to calibrate all programmed temperatures.
After calibration, press
Press
to select the test mode.
The test mode allows you to test all programmed temperatures, the calibration is not
changed.
Press
to restore factory settings.
18
or disable
to adjust brightness
to adjust the sound level.
to confirm and save the new calibration data.
the protective lid warning.
.
, contrast
and saturation
www.mn-net.com
to the