MACHEREY-NAGEL NANOCOLOR VARIO 4 Mode D'emploi page 17

Heating time programming
Select an empty slot by pressing .
Enter the desired heating time in the range from 0h:01min – 9h:59min and confirm
with .
User defined heating times can be deleted or edited in the same way.
Pre-programmed heating times can not be deleted or edited.
Date / time
Enter the time in the format hh:mm. Select the field for the date by touching.
Enter the date in the format dd-mm-20yy and confirm with .
17
www.mn-net.com