Installation Hints - dosatron D 20 S Manuel D'utilisation

INSTALLATION HINTS

the Dosatron can be connected to
the main water line directly (Fig.
6) ; on a by-pass (Fig. 7), recom-
mended.
If your flow rate is above the oper-
ating limits of the Dosatron, see §
EXCESSIVE FLOW.
to prolong the working life of the
Dosatron it is advisable to install a
filter (ex.: 50 mesh - 300 microns
depending on your water quality)
upstream.
this is imperative if the water
contains impurities or particles, espe-
cially if the water comes from a well.
Valve
Filter
Fig. 6
Excessive flow (as an indication)
If your Dosatron clicks more than 32 times, that is 16 cycles in 15
seconds, you are close to the superior flow limit. If you need more
flow, you must install a Dosatron with a superior capacity of flow.
A filter is recommended and
required for the warranty to be
valid.
Installing the Dosatron on a bypass
enables clean water to be supplied
without operating the Dosatron and
the Dosatron to be easily dismantled.
supply, you must respect the rules
Valve
Filter
©
DosatRoN INteRNatIoNaL / 42
When connecting an
installation to the public water
and regulations in force in the
country.
Check
valve
Fig. 7