Safety Instructions - Panasonic NN-CT857 Mode D'emploi

Masquer les pouces Voir aussi pour NN-CT857:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 94
Heater Operation
1. Before using CONVECTION,
COMBINATION or GRILL function for
the first time, wipe excessive oil off in
the oven cavity and operate the oven
without food and accessories on
CONVECTION 250°C, for 10 minutes.
This will allow the oil that is used for rust
protection to be burned off. This is the
only time the oven is used empty.
2. Exterior oven surfaces, including air
vents on the cabinet and the oven door
will get hot during CONVECTION,
COMBINATION and GRILLING, take
care when opening or closing the door
and when inserting or removing food and
accessories.
3. The oven has two heaters situated in the
top and back of the oven. After using the
CONVECTION, COMBINATION and
GRILL function, these surfaces will be
very hot. N.B. After cooking by these
modes, the oven accessories will be
very hot.
4. The accessible parts may become hot in
combination use. Young children should
be kept away, and children should only
use the oven under adult supervision
due to the temperatures generated.
Fan Motor Operation
While the oven is in Microwave/Heater
operation, the cooling fan always rotates to
cool the electric components. After the
completion of operation, the fan may
continue rotating for a while.
Oven Light
When it becomes necessary to replace the
oven light, please consult your dealer.
Accessories
The oven comes equipped with a variety of
accessories. Always follow the directions
given for use of the accessories.
Glass Tray
1. Do not operate the oven without the
roller ring and the glass tray in place.
2. Never use another type of glass tray
than the one specially designed for this
oven.
En-3

Safety Instructions

3. If the glass tray is hot, let it cool before
4. The glass tray can turn in either
5. If the food or cooking vessel on the
6. Do not cook foods directly on the glass
Roller Ring
1. The roller ring and the oven floor should
2. The roller ring must always be used for
Metal Tray
1. Metal Tray is for cooking on Grill,
2. Metal Tray should be placed on Glass
Round Rack
1. The Round Rack is used to facilitate
2. Do not use any metal container directly
3. Do not use the Round Rack in
Enamel Shelf and Wire Shelf
1. The shelves are for cooking on
2. When cooking on convection mode, use
cleaning or placing in water.
direction.
glass tray touches the oven walls and
stops the tray rotating, the tray will
automatically rotate in the opposite
direction. This is normal.
tray.
be cleaned frequently to prevent noise
and build-up of remaining food.
cooking together with the glass tray.
Convection and Combination modes.
Do not use the Metal Tray in Microwave
mode only.
Tray or Round Rack.
browning of small dishes and help with
the good circulation of the heat.
on the Round Rack in COMBINATION
with MICROWAVE.
MICROWAVE mode only.
convection and grill modes. Do not use
the shelves on microwave mode or
combination mode.
just one or both of the shelves in
position. When cooking on grill mode,
use the shelf in the upper position.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nn-ct878Nnct878sepgNnct857wepgb

Table des Matières