Introduction; Specifications - Amprobe IR608A Mode D'emploi

All models should be protected from the
following,
!
!
!
!

Introduction

We are confident you will find many uses for your handheld
noncontact thermometer. Compact, rugged, and easy to use—
just aim, pull the trigger, and read current surface temperatures
in less than a second. You can safely measure surface
temperatures of hot, hazardous, or hard-to-reach objects without
contact.

Specifications

Specifications subject to change without notice.
Temperature range .............. -18 to 400 °C (0 to 750 °F)
Temperature display .................. °C or 0.5 °F
Accuracy (assumes ambient operating temperature of 23 °C [73
°F]) For targets at:
-1 to 400 °C (30 to 750 °F) ....... ±2% of reading or ± 2 °C (± 3.5
-18 to -1 °C (0 to 30 °F): ........... ±3 °C (±5 °F) at 23 °C (73 °F)
Repeatability ..................... ± 2 % of reading, or ± 2 °C
Response time ................... 500 mSec, 95% response
Spectral response...................... 7–18 µm
Emissivity......................... pre-set 0.95
EMF (electro-magnetic fields) from arc
welders, induction heaters
Static electricity
Thermal shock (caused by large or abrupt
ambient temperature changes—allow 30
minutes for unit to stabilize before use)
Do not leave the unit on or near objects of
high temperature
Cautions
Note
°F), whichever is greater
±2 ºC (±3.5 ºF)
(±3 °F)
2
••••••