Environmental Protection - PROLUMIA PRO-AQUA III Manuel D'utilisation

INSTALLATION
I. Installation method
Ceiling mounting by brackets
Pendant mounting
II. Installation steps
1
LF
Drilling diameter 5-6mm, depth 30-35mm
Push the plastic expansion pipe into the hole
3
Close the xture and complete the installation
Note: After installation, please check carefully if the xture really can be hooked in.
Mounting accessories
Tapping screw x2 Plastic expansion pipe x2
III. Wiring method Note: Please cut off the power before wiring.
1
3
206
3x0,75-1,5mm²
L
N

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
Stainless-steel installation component x2
Open the clip with the help of a tool
www.prolumia.com
Access 0.75-1.5mm²
sheath cable
Access 0.75-1.5mm²
sheath cable
2
Secure the stainless-steel mounting
hook to the wall using the self-tapping
screws in the kit
Triangle hook x2 (Pendant mounting)
2
Access 0.75-1.5mm²
sheath cable
Turn down the re ector
9