SOLAC CE4493 Mode D'emploi page 10

hole at the top of the steamer is clean before
refitting the part.
Fit the steamer on its spindle again
•
It is advisable to remove the water from the
cup-holder tray regularly.
lIMEsCalE REMoval
We recommend de-scaling the appliance
once a year using a special product for coffee
machines so as to maintain the coffee maker
in perfect condition. We recommend the Solac
de-scaling agent.
1 Follow the instructions that come with the
de-scaling product.
2 To flush out the circuits, fill the tank again with
water only, switch on the coffee maker, fit the
filter holder without coffee, and carry out all the
steps described in the 'Operation' section twice.
During this process, turn the steam control (13)
and release the steam for 1 minute.
aNoMalIEs aND REpaIR
Take the appliance to an authorised technical
·
support service if problems arise. Do not try to
dismantle or repair without assistance, as this
may be dangerous.
For EU product versions and/or in the case
that it is requested in your country:
CE4493_cafetera.indd 12
EColoGY aND RECYClabIlITY oF
THE pRoDUCT
The materials of which the packaging of this
·
appliance consists are included in a collec-
tion, classification and recycling system.
Should you wish to dispose of them, use the
appropriate public containers for each type of
material.
The product does not contain concentrations
·
of substances that could be considered harm-
ful to the environment
This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for
the selective collection of waste electrical and
electronic equipment (WEEE)
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU
on Electromagnetic Compatibility, Directive
2011/65/EU on the restrictions of the use of
certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/
EC on the ecodesign requirements for ener-
gy-related products.
EN
13/4/16 16:06