Bresser 33-10100 Manuel De L'utilisateur page 36

f) Press or to select the menu item „quit".
g) Press OK to quit the settings mode.
4.1.13 Adjusting the working time period
(timer function)
You can choose between the following modes: 24H,
Day, Night.
a) Press or to select the settings mode.
b) Press OK to access the settings menu.
c) Press or to select TIMER SWITCH.
d) Press or to set 24H, Day or Night.
e) Press OK to save the current setting. A red dot will
now indicate your selection.
f) Press or to select the menu item „Quit".
g) Press OK to quit the settings mode.
4.1.14 Reset to factory settings
The following paragraph describes how to reset the set-
tings to the default values. This will delete your individuel
settings.
a) Press or to select the settings mode.
b) Press OK to access the settings menu.
c) Press or to select RESET.
d) Press OK to to reset to default settings. A red dot will
now indicate your selection.
36
e) Press or to select the menu item „Quit".
f) Press OK to quit the settings mode.
4.1.15 View image or video
a) Switch to TEST mode and press
view-mode.
b) Press OK to view the latest picture (or video) on a
connected LCD screen or camera, monitor or image
viewer with TV-in connector.
c) Press OK to start playing the selected video on your
monitor.
Note: Video clips cannot be played on the LCD screen
of the control remote.
d) Press to stop playing and return to playback mode.
e) Press to view the next picture (or video) and
view the previous.
f) Press to return.
When viewing images, the total number of all images in
the SD-card and the index number of the displayed im-
age will be shown respectively.
or to select pre-
to